LCDDIGITAL
USERS GUIDE


LCD7ATSC 7" DIGITAL TV AND LCD84ATSC 8" DIGITAL TV


TO ALLOW THE TV TO SEARCH FOR CHANNELS YOU MUST TUNE THE TV. EVEN IF YOU ARE CONNECTING IT TO A CABLE BOX, YOU MUST TUNE THE TV. (WHEN CONNECTING THE TV TO CABLE USE THE SMALL 2" CORD, THAT COMES WITH YOUR TV, THAT HAS A CABLE ADAPTOR AT ONE END AND THE OTHER END PLUGS INTO THE TV)
TO TUNE THE TV:
FIRST OFF, YOU WILL NEED TO MAKE SURE THAT YOU ARE IN TV MODE. PRESS THE BUTTON THAT IS MARKED TV/AV. YOU WILL NOTICE THAT A SMALL BLUE SCREEN IN THE UPPER LEFT CORNER APPEARS. PRESS THE TV/AV BUTTON UNTIL THE WORD TV IS HIGHLIGHTED, AND NOT AV1 OR AV2. AV1 AND AV2 ARE MODES THAT ARE USED IF YOU ARE ATTACHING A DVD PLAYER OR CAMERA AND ARE USING THE UNIT BASICALLY AS A MONITOR.
 
A BRIEF NAVIGATION THROUGH THE MENU SCREENS (YOU WILL BE USING YOUR VOLUME AND CHANNEL BUTTONS EXTENSIVELY, SO LOCATE THOSE NOW ON YOUR TV)

NOW THAT YOUR UNIT IS IN TV MODE, YOU WILL WANT TO MAKE SURE THAT YOU HAVE IT APPROPRIATELY SET FOR ANTENNA OR CABLE USE. PRESS THE MENU BUTTON ONE TIME, THEN PRESS THE VOLUME PLUS BUTTON FOUR TIMES. THIS SHOULD NAVIGATE YOU TO THE MENU THAT IS DENOTED BY A SATELLITE DISH PICTURE ABOVE IT. THIS IS YOUR TUNING MENU. PRESS THE CHANNEL MINUS BUTTON ONE TIME. YOU WILL SEE THAT YOU HAVE EITHER THE <AIR> OR THE <CATV> SELECTED. WHEN YOU PRESS THE VOLUME PLUS KEY YOU WILL TOGGLE BETWEEN <AIR> AND <CATV>. <AIR> STANDS FOR USING THE TV WITH YOUR ANTENNA. <CATV> STANDS FOR USING YOUR TV WITH A CABLE BOX. MAKE SURE THAT THE APPROPRIATE SELECTION IS SELECTED FOR HOW YOU WILL BE USING YOUR TV.

NOW, WHILE YOU ARE STILL ON THIS MENU PAGE, AND IF YOU ARE JUST USING YOUR TV THE STANDARD WAY, WITH THE ANTENNA FULLY EXTENDED (HOPEFULLY YOU HAVE ALREADY DONE THIS) YOU WILL HAVE THE OPTION <AIR> SELECTED. NOW PRESS THE CHANNEL MINUS KEY ONE TIME. THIS WILL TAKE YOU DOWN TO THE NEXT LINE OF THE MENU SCREEN. THE MENU ITEM IS "AUTO SCAN". ONCE THIS ITEM IS HIGHLIGHTED, YOU WILL WANT TO PRESS THE VOLUME PLUS KEY ONE TIME. THIS WILL TAKE YOU TO THE NEXT SCREEN. NOW PRESS THE CHANNEL MINUS BUTTON ONE TIME. THIS WILL TAKE YOU TO THE LINE THAT SAYS "START TO SCAN". YOU WILL NOW PRESS THE VOLUME PLUS KEY ONE TIME. THIS WILL INITIATE YOUR SCANNING PROCESS. THAT’S IT... YOU’RE DONE. JUST HOLD ON FOR A COUPLE OF MINUTES WHILE YOUR TV IS FINDING THE SIGNALS IN YOUR AREA.

AFTER ABOUT FIVE MINUTES OF THE SCREEN WHERE THE BAR IS GOING ACROSS THE PAGE, YOU SHOULD NOTICE YOUR TV RETURN TO ITS REGULAR MODE. YOU SHOULD NOW PRESS YOUR CHANNEL PLUS KEY SO THAT YOU MAY SEE WHAT CHANNELS YOUR TV PICKED UP IN YOUR AREA.

IF YOU HAVE ANY FURTHER QUESTIONS, PLEASE CALL US AT 1-888-347-1777

TIPS FOR BEST SIGNAL STRENGTH:

1) TRY TUNING YOUR TV WITH THE ANTENNA POINTED IN DIFFERENT DIRECTIONS, YOU MAY NOTICE YOU GET TELEVISION STATIONS YOU DID NOT KNOW YOU COULD RECEIVE.
2) TRY TO BE NEAR AN OPEN WINDOW OR OPEN DOOR. YOU CAN EVEN TRY TUNING YOUR TV OUTSIDE TO SEE WHAT MAXIMUM SIGNAL STRENGTH YOU HAVE IN YOUR AREA.
3) THERE ARE ALWAYS RABBIT EAR ANTENNAS AVAILABLE AT YOUR LOCAL ELECTRONICS STORE THAT YOU CAN TRY HOOKING UP WITH YOUR UNIT. USE THE ADAPTOR INCLUDED WITH THE UNIT TO USE THESE TYPES OF EXTERNAL ANTENNAS.

NOTE: FOR THE 8.4" DIGITAL TV, TO CONNECT AN EXTERNAL ANTENNA OR CABLE CORD, SIMPLY TUG GENTLY ON THE ANTENNA AND YOU WILL NOTICE IT WILL SLIP RIGHT OUT, ALLOWING YOU AN INSERTION POINT TO PLUG IN THE ADAPTOR INCLUDED WITH THE UNIT.